To complement your Starter Kit, we recommend the “Spa Fill Pre-Filter”
Pre-Filter solves water problems before they get into your spa.
The Pre-Filter enhances the performance of or other
hot tub maintenance products.
The Pre-Filter will clean up to 40,000 gallons of water. The Pre-Filter will last the average spa owner for over 10 years
The Pre-Filter will solve most initial spa water problems caused by:
- Heavy Metals (Including copper)
- Organic Contaminants
- High Calcium / Hard Water
- Sediment and Chlorine
Other Suggested Uses:
Save money, time and hassle with pre-conditioned water. Reduces or eliminates damaging contaminants BEFORE they get into your hot tub.
SPA WATER SO SAFE YOU CAN DRINK IT!
Pre-Filter Specification Sheet
When tested against the U.S. National Sanitation Foundations' (NSF) Standard No. 53 “Drinking Water Treatment Units – Health Effects” the Pre-Filter water treatment unit met all requirements of the standard.
2 ½” X 10” with FPT inlet/outlet; weight: 1 ¼ lbs
Filter Media Test:
Input turbidity: 12 TU
Effluent turbidity: Initial: 0.8 TU
Effluent turbidity: 50%: 0.9 TU
Capacity: Up to 40,000 Gallons (depending on source water quality)
Flow Rate: 2 GPM
Temp range: 35F-100F
Working pressure range: 20-100 psi
The Pre-Filter is a combination of granular activated carbon (GAC) and a reduction/oxidation media.The combined media reduces or eliminates these contaminants:
Volatile Organic Contaminates (VOC’s)
Chlorine and its byproducts (THM’s)
The Pre-Filter has been tested to applicable the U.S. NSF's 42 & 53 Standards by an independent lab to reduce and/or eliminate all contaminants listed. There are hundreds of other contaminants the filter reduces and/or eliminates.
Calcites and Lime/Scale:
The Pre-Filter alters the molecular structure of calcite which inhibits its clinging capability. Calcium ions are removed from the water which changes calcite lime/scale deposits into aragonite. This alteration causes the lime/scale to remain suspended in the water where it cannot cling to equipment.
All materials used in the Pre-Filter are approved by the U.S. FDA for contact with foodstuffs including potable water. All thermoplastic/thermoset plastics used comply with the U.S. NSF's Standard 14.